Sako 75/85 Action III (75) / 85 Action S (85) Aluminium 0 MOA Ultra Low - Silver

The Sako 75/85 Action III (75) / 85 Action S (85) Aluminium 0MOA Ultra Low Mount is a precision-engineered accessory designed to offer a sleek, low-profile mounting solution for your optics. Specifically crafted for Sako 75 and 85 rifles, this mount is made from high-grade aluminum, providing a perfect balance of strength and light weight. Its black anodized finish ensures durability and resistance to corrosion, while also offering a streamlined, non-reflective appearance.

This 0MOA mount is ideal for shooters who prefer a flat mounting surface, allowing for precise and stable optic placement. The ultra-low design positions the scope close to the barrel, enhancing accuracy and maintaining a compact rifle profile. This setup is particularly advantageous for shooters seeking a lower line of sight, which can improve shooting comfort and precision.

With pre-drilled holes that align perfectly with the receiver of your Sako 75 or 85 rifle, installation is straightforward and secure. This mount is designed to hold your optics firmly in place, even under heavy recoil, ensuring that your zero is maintained shot after shot.

Whether you're a hunter or a precision shooter, the Sako 75/85 Action III (75) / 85 Action S (85) Aluminium 0MOA Ultra Low Mount provides a reliable and durable solution for enhancing your rifle's performance.

Specification Table:

Fitting instructions for Sako 75/85 picatinny Rails

Warning
•    If you have any doubts or concerns when attempting to fit this rail please consult a qualified gunsmith.
•    Attention always ensure that firearm is unloaded
•    Bolt is removed
•    All normal safety precautions are followed
•    This is an ultralow picatinny rail, which is designed to be an interference fit 
•    Whilst doing this pay particular care not to damage either the rail or the rifle with any tool used.

Step 1
Ensure bolt is removed from rifle
Step 2
Remove all screws from rail before fitting
Step 3
Slide rail onto dovetails from rear
Step 4 
With a suitable tool (Soft faced hammer) tap the rear of the rail onto the dovetail until the bottom for the rear face of the rail is as far forward as the rear most edge of the rear dovetail.
Rember this rail is an interference/friction fit and tolerances on the dovetails of the Sako rifle can be quite varied so some many require more percussion effort than others.
Step 5
Fit the rear most (Large screw) which acts as a recoil lug and ensure that it goes down all the way through, until it is visible from the rear, under the rail and in contact with the rifle action below.
If you have pushed the rail too far onto the dovetail, you may need to tap the rail gently rearward until the recoil screw can be fully seated, as above.
Step 6
Remove recoil lug screw and treat all five grub screws with the Vibra-tite provided and screw home with the allen keys provided long end into the screw head, short end for turning i.e ⅂ . This screws only need to be nipped tight.
Step 7
Whilst ensuring rifle is unloaded and in a safe direction, refit, and cycle bolt to ensure clearance of the back of the rifle.